VORTRIXE & OKMO M94 Upgraded Horizontal Water Cooled Hit & Miss Gasoline Engine Model
Features:
- It's a horizontal gasoline model engine with a water-cooled ancient structure. The engine cylinder head design is unique, with the valve mechanism installed on the left side. The compact side gear drive mechanism controls the exhaust shutdown, increasing the processing complexity of the side valve structure.
- A 90-degree helical gear is used.
- The flywheel on the left is equipped with a speed limiter connected to a large bevel in the middle.
- Unique shape with a wooden base, easy to place and operate.
- Value: A high-end metal craft internal combustion engine model. The structure has been upgraded and processed, making it easy to operate. It is a great personalized gift for model fans or your friends.
- For Ages: 16+
Engine Startup Steps:
1. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, install the three AA batteries, and close the bottom plate.
2. Fill the fuel tank with 95# gasoline. After filling, ensure there is no air in the fuel pipe.
3. On the right side of the engine (installation of the flying hammer position), slowly turn the flywheel counterclockwise by hand more than one turn. This allows the mixed gasoline to fully enter the cylinder.
4. Turn on the power switch and rotate the flywheel counterclockwise on the right side of the engine (installation of the flying hammer position) to start the engine.
Precautions:
1. If the ignition device is normal and the cylinder has normal compression but the engine does not start, the carburetor needle may need adjustment.
2. Screw the top screw on the carburetor, then loosen 1/4 turn and start the flywheel. Repeat as needed to achieve the normal gasoline-to-air mixture ratio.
